Asus AP120R User Guide - Page 29

Installing 5.25-inch drives

Get Asus AP120R PDF manuals and user guides View all Asus AP120R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

2.7 Installing 5.25-inch drives Make sure to unplug the power cable before installing or removing any system components. Failure to do so may cause severe damage to the motherboard and other system components! The system comes with four 5.25-inch drive bays located on the upper front part of the chassis. An 1 optical drive that comes standard with the system package occupies 2 the uppermost bay (labeled 1). The 3 three lower bays (labeled 2, 3, and 4) are available for additional 5.25-inch 4 optical, zip, or floppy disk drives. You must remove the front panel cover before installing a 5.25-inch drive(s). 2.7.1 Removing the front panel cover To remove the front panel cover: 1 2 1. Locate and remove two screws that secure the left side cover to the chassis. Keep the screw for later use. 2. Slightly pull the cover toward the direction of the rear panel until it disengages from the chassis. Set the cover aside. ASUS AP120-E1 user guide 2-13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
2-13
ASUS AP120-E1 user guide
2.7
Installing 5.25-inch drives
The system comes with four
5.25-inch drive bays located on the
upper front part of the chassis. An
optical drive that comes standard
with the system package occupies
the uppermost bay
(labeled 1)
. The
three lower bays
(labeled 2, 3, and 4)
are available for additional 5.25-inch
optical, zip, or floppy disk drives.
Make sure to unplug the power cable before installing or removing any
system components. Failure to do so may cause severe damage to the
motherboard and other system components!
2.7.1
Removing the front panel cover
To remove the front panel cover:
1.
Locate and remove two screws
that secure the left side cover
to the chassis. Keep the screw
for later use.
2.
Slightly pull the cover toward
the direction of the rear panel
until it disengages from the
chassis. Set the cover aside.
1
2
1
2
3
4
You must remove the front panel cover before installing a 5.25-inch
drive(s).