Asus CUR-DLSR CUR-DLSR User Manual - Page 31

ASUS CUR-DLSR User's Manual, Wake-On-LAN Connector 3-pin WOL_CON, Wake On LAN, Wake-On-Ring

Get Asus CUR-DLSR PDF manuals and user guides View all Asus CUR-DLSR manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

3. HARDWARE SETUP 3) Wake-On-LAN Connector (3-pin WOL_CON) This connector connects to a LAN card with a Wake-On-LAN output, such as the ASUS PCI-L101 Ethernet card (see 7. APPENDIX). The connector powers up the system when a wakeup packet or signal is received through the LAN card. IMPORTANT: This feature requires that Wake On LAN is enabled (see 4.5.1 Power Up Control) and that your system has an ATX power supply with at least 720mA +5V standby power. IMPORTANT: Requires an ATX power supply with at least 720mA +5 volt standby power WOL_CON +5 Volt Standby PME CUR-DLSR CUR-DLSR Wake-On-LAN Connector Ground 4) Wake-On-Ring Connector (2-pin WOR) This connector connects to internal modem cards with a Wake-On-Ring output. The connector powers up the system when a ringup packet or signal is received through the internal modem card. NOTE: For external modems, Wake-On-Ring is detected through the COM port. IMPORTANT: This feature requires that the Power Up on Modem Act parameter is enabled (see 4.5.1 Power Up Control) and that the system has an ATX power supply with at least 720mA +5V standby power. 3. H/W SETUP Connectors WOR 12 CUR-DLSR Ground Ring# CUR-DLSR Wake-On-Ring Connector ASUS CUR-DLSR User's Manual 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
31
3. HARDWARE SETUP
ASUS CUR-DLSR User’s Manual
3.
H/W SETUP
Connectors
3)
Wake-On-LAN Connector (3-pin WOL_CON)
This connector connects to a LAN card with a Wake-On-LAN output, such as the
ASUS PCI-L101 Ethernet card (see
7. APPENDIX
). The connector powers up
the system when a wakeup packet or signal is received through the LAN card.
IMPORTANT:
This feature requires that
Wake On LAN
is enabled (see
4.5.1
Power Up Control
) and that your system has an ATX power supply with at least
720mA +5V standby power.
4)
Wake-On-Ring Connector (2-pin WOR)
This connector connects to internal modem cards with a Wake-On-Ring output.
The connector powers up the system when a ringup packet or signal is received
through the internal modem card.
NOTE:
For external modems, Wake-On-Ring
is detected through the COM port.
IMPORTANT:
This feature requires that the
Power Up on Modem Act
parameter
is enabled (see
4.5.1 Power Up Control
)
and that the system has an ATX power
supply with at least 720mA +5V standby power.
CUR-DLSR Wake-On-LAN Connector
IMPORTANT:
Requires an ATX power
supply with at least 720mA +5 volt
standby power
+5 Volt Standby
PME
Ground
WOL_CON
CUR-DLSR
CUR-DLSR Wake-On-Ring Connector
WOR
Ring#
Ground
2
1
CUR-DLSR