Asus H610T-EM-A User Manual English - Page 17
System memory
View all Asus H610T-EM-A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
2.4 System memory This motherboard comes with two Double Data Rate 4 (DDR4) Dual Inline Memory Module (DIMM) sockets. The figure below illustrates the location of the DDR4 DIMM sockets: SO-DIMM_B1 SO-DIMM_A1 Channel Channel A Channel B Sockets DIMM_A1 DIMM_B1 IMPORTANT! • You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation. • Always install the DIMMs with the same CAS Latency. For an optimum compatibility, we recommend that you install memory modules of the same version or data code (D/C) from the same vendor. Check with the vendor to get the correct memory modules. • According to Intel® CPU spec, DIMM voltage below 1.35V is recommended to protect the CPU. NOTE: Visit the ASUS website at www.asus.com for the latest QVL. Chapter 2: Motherboard information 2-9