Asus H610T-EM-A User Manual English - Page 42
Network Stack Configuration, USB Configuration
View all Asus H610T-EM-A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
[AHCI] Set to [AHCI] when you want the SATA hard disk drives to use the AHCI (Advanced Host Controller Interface). The AHCI allows the onboard storage driver to enable advanced Serial ATA features that increases storage performance on random workloads by allowing the drive to internally optimize the order of commands. SATA6G_1/2/3 Allow you to enable/disable the SATA6G_1/2/3 port. Configuration options: [Disabled] [Enabled] M.2(SOCKET3) Allow you to enable/disable the M.2(SOCKET3) slot. Configuration options: [Disabled] [Enabled] 3.3.8 Network Stack Configuration Network Stack This item allows user to disable or enable the UEFI network stack. Configuration options: [Disabled] [Enabled] The following two items appear only when you set the previous item to [Enabled]. Ipv4 PXE Support This item allows user to disable or enable the Ipv4 PXE Boot support. Configuration options: [Disabled] [Enabled] Ipv6 PXE Support This item allows user to disable or enable the Ipv6 PXE Boot support. Configuration options: [Disabled] [Enabled] 3.3.9 USB Configuration XHCI Hand-off This item functions as a workaround for OSes without XHCI hand-off support. The XHCI ownership change should be claimed by XHCI driver. Configuration options: [Enabled] [Disabled] USB Mass Storage Driver Support Allows you to enable or disable USB Mass Storage Driver Support. Configuration options: [Disabled] [Enabled] U32G1_1~4, USB_5~8 Allows you to enable or disable USB ports. Once set to [Disabled], any USB devices plugged into the connector will not be detected by BIOS or OS. Configuration options: [Disabled] [Enabled] 3-8 H610T-EM-A