Asus H610T-EM-A User Manual English - Page 19
Jumpers
![]() |
View all Asus H610T-EM-A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
2.5 Jumpers 1. Clear CMOS jumper (2-pin CLRTC) The Clear CMOS jumper allows you to clear the Real Time Clock (RTC) RAM in the CMOS, which contains the date, time, system passwords, and system setup parameters. CLRTC GND +3V_BAT PIN 1 Connector type HEADER 1x2p, 2.54mm pitch, S/T To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2. Short-circuit pin 1-2 with a metal object or jumper cap for about 5-10 seconds. 3. Plug the power cord and turn ON the computer. 4. Hold down the key during the boot process and enter BIOS setup to re-enter data. DO NOT short-circuit the pins except when clearing the RTC RAM. Shortcircuiting or placing a jumper cap will cause system boot failure! NOTE: If the steps above do not help, remove the onboard battery and move the jumper again to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the battery. Chapter 2: Motherboard information 2-11
![](/manual_guide/products/asus-h610tema-user-manual-english-5eec9df/19.png)