Asus Hummingbird User Guide - Page 35
Internal connectors
View all Asus Hummingbird manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
2.7.2 Internal connectors 1. Intel® NM10 Serial ATA connectors (7-pin SATA1, SATA2 [Red]) Supported by the Intel® NM10 chipset, these connectors are for the Serial ATA signal cables for Serial ATA hard disk drives that allow up to 3Gb/s of data transfer rate. The actual data transfer rate depends on the speed of Serial ATA hard disks installed. 2. Marvell® 6121 Serial ATA connectors (7-pin SATA_E1, SATA_E2 [Blue]) Supported by the Marvell® 6121 chipset, these connectors are for the Serial ATA signal cables for Serial ATA hard disk drives that allow up to 3Gb/s of data transfer rate. If you installed Serial ATA hard disk drives to these connectors, you can create a RAID 0 or RAID 1 configuration. ASUS Hummingbird 2-19
ASUS Hummingbird
2-19
2.7.2
Internal connectors
1.
Intel
®
NM10 Serial ATA connectors (7-pin SATA1, SATA2 [Red])
Supported by the Intel
®
NM10 chipset, these connectors are for the Serial
ATA signal cables for Serial ATA hard disk drives that allow up to 3Gb/s of
data transfer rate.
The actual data transfer rate depends on the speed of Serial ATA hard disks
installed.
2.
Marvell
®
6121 Serial ATA connectors (7-pin SATA_E1, SATA_E2 [Blue])
Supported by the Marvell
®
6121 chipset, these connectors are for the Serial
ATA signal cables for Serial ATA hard disk drives that allow up to 3Gb/s of
data transfer rate.
If you installed Serial ATA hard disk drives to these connectors, you can create
a RAID 0 or RAID 1 configuration.