Asus Hummingbird User Guide - Page 57
Storage Configuration
View all Asus Hummingbird manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
4.3.4 Storage Configuration The items in this menu allow you to set or change the configurations for the SATA devices installed in the system. Select an item then press if you wish to configure the item. Main BIOS SETUP UTILITY Storage Configuration Configure SATA as SATA Run Mode Configuration [IDE] [Enhanced] Options IDE AHCI Disabled ←→ Select Screen ↑↓ Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2009, American Megatrends, Inc. Configure SATA as [IDE] Sets the configuration for the Serial ATA connectors supported by the Intel® NM10 chipset. Configuration options: [IDE] [AHCI] [Disabled] • If you want to use the Serial ATA hard disk drives as Parallel ATA physical storage devices, keep the default setting [IDE]. • If you want the Serial ATA hard disk drives to use the Advanced Host Controller Interface (AHCI), set this item to [AHCI]. The AHCI allows the onboard storage driver to enable advanced Serial ATA features that increases storage performance on random workloads by allowing the drive to internally optimize the order of commands. SATA Run Mode Configuration [Enhanced] This item appears only when you set the previous item to [IDE]. Configuration options: [Compatible] [Enhanced] ASUS Hummingbird 4-13