Asus L7 L7000 Hardware (English) - Page 53
Thermal Power Control
View all Asus L7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Standby Mode In addition to reducing the CPU clock, this mode puts devices including the LCD backlight in their lower active state. The Notebook PC enters Standby mode when the system remains idle for a specified amount of time. The timeout can be set through the BIOS Setup. To resume system operation, press any key on the keyboard, touchpad, or external mouse (or moving the mouse). A Customized Power-saving Example The timeout settings for System Standby, Auto Suspend, Hard Disk Off, and Video Off specify the amount of time the system must be inactive before the next power management level is enabled. The example below demonstrates this function. If the Hard Disk Timeout is set to 2 minutes, the Standby Timeout to 8 minutes, and Auto Suspend Timeout to 10 minutes, the following power management events will take place: 1. After 2 minutes of system idle, the hard disk spins down. 2. After 6 additional minutes (a total of 8 minutes of system idle) the system enters Standby. 3. After 2 minutes in the system Standby mode (a total of 10 minutes of system idle), the system suspends to memory or to disk (depending on BIOS setup). After the system has suspended, operation can be returned or resumed to the point in your application where it was suspended. Power State Summary 4. Using Power State Stand by STR Entry Event • Stand by through Windows Start button, • Timer as set though "Power Management" in Windows Control Panel or BIOS setup • Timer as set through BIOS setup • Hotkey STD Soft OFF • Timer as set through BIOS setup • Hotkey • Battery Extremely Low • Power button • "Shut down" through Windows Start button Exit Event • Any device • Battery low • Ring indicator • Schedule Alarm • Power button • Schedule Alarm • Power button • Schedule Alarm • Power button Thermal Power Control There are three power control methods for controlling the Notebook PC's thermal state. These power control cannot be configured by the user and should be known in case the Notebook PC should enter these states. The following temperatures represent the chassis temperature (not CPU). • The fan can be turned ON or OFF for active cooling when over 131˚F (55˚C) • The processor can be throttled (decreased/increased CPU speed) for passive cooling when over 158˚F (70˚C). • The system can be shutdown for critical cooling when over 185˚F (85˚C). 53