Asus L7 L7000 Hardware (English) - Page 64
IDE Primary Master, IDE Primary Slave
View all Asus L7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
IDE Primary Master This field is used to configure the IDE Hard Disk installed in the system. To configure a hard disk drive, move the cursor to highlight the Primary Master field and press the Enter key to enter the sub-menu. IDE Primary Master [4871MB] Type: Cylinders: Heads Sectors: Maximum Capacity: [Auto] [10068] [ 15] [63] 4871MB Multi-Sector Transfers: LBA Mode Control: 32 Bit I/O: Transfer Mode: Ultra DMA Mode: [16 Sectors] [Enabled] [Enabled] [Fast PIO 4] [Mode 2] Item Specific Help Auto = autotypes hard-disk drive installed here. None = force setting no IDE device. CD-ROM = a CD-ROM drive is installed here. User = you enter parameters of hard-disk drive installed at this connection. NOTE: Before attempting to configure a hard disk drive, make sure you have the configuration information supplied by the manufacturer of the drive. Incorrect settings may cause your system to not recognize the installed hard disk. To allow the BIOS to detect the drive type automatically, select [AUTO]. IDE Primary Slave IDE Primary Slave [CD-ROM] Type: [Auto] Multi-Sector Transfers: LBA Mode Control: 32 Bit I/O: Transfer Mode: Ultra DMA Mode: [Disabled] [Disabled] [Disabled] [Fast PIO 4] [Mode 2] Item Specific Help This setting enables or disables 32 bit IDE data transfers. 5. BIOS Setup 64