Asus N100I-EM-A Users Manual English - Page 41
Network Stack Configuration, USB Configuration
View all Asus N100I-EM-A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Allows you to enables or disables the onboard SATA device. Configuration options: [Disabled] [Enabled] NOTE: The following item appears only when you set SATA Controller(s) to [Enabled]. SATA Mode Selection Allows you to determine how SATA controller(s) operate. Configuration options: [AHCI] SATA6G_ 1 Allows you to enable or disable SATA Port. Configuration options: [Disabled] [Enabled] M.2 M Key / SATA 6G_2 Configuration options: [Disabled] [Enabled] 3.3.10 Network Stack Configuration Network Stack This item allows you to disable or enable the UEFI Network Stack. Configuration options: [Disabled] [Enabled] NOTE: The following items appear only when you set Network Stack to [Enabled]. IPv4 PXE Support Allows you to enable or disable IPv4 PXE boot support. If disabled, IPv4 PXE boot support will be unavailable. Configuration options: [Disabled] [Enabled] IPv6 PXE Support Allows you to enable or disable IPv6 PXE boot support. If disabled, IPv6 PXE boot support will be unavailable. Configuration options: [Disabled] [Enabled] 3.3.11 USB Configuration Legacy USB Support [Enabled] [Enabled] Enables the support for USB devices on legacy operating systems (OS). [Disabled] The USB devices can be used only for the BIOS setup program. [Auto] Allows the system to detect the presence of USB devices at startup. If detected, the USB controller legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled. 3-10 N100I-EM-A