Asus N4L-VM DH N4L-VM DH User's Manual English Edition - Page 49

N4L-VM DH IDE NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1. ® N4L-VM DH IDE connector PIN 1 3 . I n t e l® ICH7-M DH Southbridge Serial ATA connectors (7-pin SATA0 [black], SATA2 [black]) These connectors are for the Serial ATA signal cables for Serial ATA I (1.5 Gb/s) hard disk and optical disk drives. If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID 1, and Intel® Matrix Storage configuration through the onboard Intel® RAID controller. Refer to section "5.4.2 Intel® RAID configurations" for details on how to set up Serial ATA RAID configurations. The RAID function of these connectors is set to [Disabled] by default. If you intend to create a Serial ATA RAID set using these connectors, set the C o n f i g u r e S A T A A s item in the BIOS to [RAID]. See section "4.3.5 IDE Configuration" for details. GND RSATA_RXN2 RSATA_RXP2 GND RSATA_TXN2 RSATA_TXP2 GND N4L-VM DH ® N4L-VM DH SATA connectors SATA2 SATA0 GND RSATA_TXP1 RSATA_TXN1 GND RSATA_RXP1 RSATA_RXN1 GND ASUS N4L-VM DH 2-27