Asus N4L-VM DH N4L-VM DH User's Manual English Edition - Page 55

13. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V) These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. EATXPWR ATX12V +3 Volts +12 Volts +12V DC GND +12 Volts +5V Standby Power OK N4L-VM DH Ground +12V DC GND +5 Volts Ground ® +5 Volts Ground N4L-VM DH ATX power connectors +3 Volts +3 Volts Ground +5 Volts +5 Volts +5 Volts -5 Volts Ground Ground Ground PSON# Ground -12 Volts +3 Volts • For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version). • Do not forget to connect the 4-pin ATX +12 V power plug; otherwise, the system will not boot. • Use of a PSU with a higher power output is recommended when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate. • Visit www.asus.com for the latest power requirements table. ASUS N4L-VM DH 2-33