Asus NCCH-DL Disk Array & Driver Installation Guide English Version - Page 25
During POST, the FastTrak S150 TX4
View all Asus NCCH-DL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
6. After you have created the RAID 0 set, press any key to reboot the system. During POST, the FastTrak S150 TX4™ BIOS checks and displays the disk array information. 7. Once the array is created, use the FDISK utility to format the array as a single hard drive. 8. After you have formatted the arrayed drives, install an operating system (OS). The OS will treat the RAID 0 array as a single drive unit. During the OS installation, the system prompts you to install third-party SCSI or RAID driver. Refer to section "2. RAID driver installation" for details. RAID configuration and driver installation 25
RAID configuration and driver installation
RAID configuration and driver installation
RAID configuration and driver installation
RAID configuration and driver installation
RAID configuration and driver installation
25
25
25
25
25
6.
After you have created the RAID 0 set, press any key to reboot the
system.
During POST, the FastTrak S150 TX4
™
BIOS checks and displays the
disk array information.
7.
Once the array is created, use the FDISK utility to format the array as
a single hard drive.
8.
After you have formatted the arrayed drives, install an operating
system (OS). The OS will treat the RAID 0 array as a single drive unit.
During the OS installation, the system prompts you to install third-party
SCSI or RAID driver. Refer to section
“
2. RAID driver installation
”
for
details.