Asus NCCH-DL Disk Array & Driver Installation Guide English Version - Page 6

1.5 Adaptec RAID Configuration Utility The Adaptec RAID Configuration Utility allows you to create RAID 0 and RAID 1 set(s) from SATA hard disk drives connected to the SATA connectors supported by the motherboard Southbridge chip. To enter the Adaptec RAID Configuration Utility: 1. Turn on the system after installing all the SATA hard disk drives. 2. During POST, the Adaptec HostRAID™ technology automatically detects the installed SATA hard disk drives and displays any existing RAID set(s). Press to enter the utility. 3. Use the arrow keys to highlight an option. The A r r a y C o n f i g u r a t i o n U t i l i t y menu lets you create and manage RAID sets. The D i s k U t i l i t i e s allows you to check and verify SATA hard disk drives. At the bottom of the screen is the legend box. The keys on the legend box allow you to navigate through the setup menu options or execute commands. The keys on the legend box vary according to the menu level. 6 RAID configuration and driver installation