Asus P10S-M WS P10S-M WS User Guide for English - Page 37
Serial ATA 6.0 Gbps connectors 7-pin SATA 6Gbps_1-8 connectors [Gray], VGA connector 16-1 pin
View all Asus P10S-M WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
3. Serial ATA 6.0 Gbps connectors (7-pin SATA 6Gbps_1-8 connectors [Gray]) Supported by the Intel® C236 chipset, these connectors are for the Serial ATA signal cables for Serial ATA hard disk drives that allows up to 6Gb/s of data transfer rate. If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID 1, RAID 10, or RAID 5 configuration. • These connectors are set to [AHCI Mode] by default. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID Mode]. Refer to section 5.1.3 Setting the RAID mode in BIOS for details. • Before creating a RAID set, refer to the manual bundled in the motherboard support DVD. 4. VGA connector (16-1 pin VGA_HDR1) (for P10S-M WS/IPMI-O only) This connector supports the VGA High Dynamic-Range interface. ASUS P10S-M WS Series 1-23 Chapter 1