Asus P10S-M WS P10S-M WS User Guide for English - Page 90
Restore AC Power Loss [Last State], Power On By PCIE [Disabled]
View all Asus P10S-M WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
APM Allows you to configure the Advance Power Management (APM) settings. Restore AC Power Loss [Last State] When set to [Power Off], the system goes into off state after an AC power loss. When set to [Power On], the system will reboot after an AC power loss. When set to [Last State], the system goes into either off or on state, whatever the system state was before the AC power loss. Configuration options: [Power Off] [Power On] [Last State] Power On By PCIE [Disabled] [Disabled] [Enabled] Disables the PCIE devices to generate a wake event. Enables the PCIE devices to generate a wake event. Power On By Ring [Disabled] [Disabled] [Enabled] Disables the Ring devices to generate a wake event. Enables the Ring devices to generate a wake event. This item functions only if there is a serial port (COM1) connector on the motherboard. Power On By RTC [Disabled] [Disabled] [Enabled] Disables RTC to generate a wake event. When set to [Enabled], the items RTC Alarm Date (Days) and Hour/Minute/ Second will become user-configurable with set values. SMART Settings SMART Self Test [Enabled] Allows you to run SMART Self Test on all HDDs during POST. Configuration options: [Disabled] [Enabled] Chapter 3 3-24 Chapter 3: BIOS Setup