Asus P2-99 P2-99 User Manual - Page 16

III. H/W SETUP Jumpers III. HARDWARE SETUP 4. Voltage Regulator Output Setting (VCORE) This jumper sets the core voltage supplied to the microprocessor. VCORE 3 3 2 2 1 1 Normal Test (Default) P2-99 P2-99 CPU Core Voltage Setting WARNING! Using a higher voltage Test may help when overclocking but may result in the shortening of your computer component's life. It is strongly recommended that you leave both the VIO and VCORE jumpers on their default settings. 5. CPU Bus Frequency Selection (FS0, FS1, FS2, FS3) This option tells the clock generator what frequency to send to the CPU, DRAM, and 440ZX AGPset. This allows the selection of the CPU's External frequency (or BUS Clock). The BUS Clock multiplied by the BUS Multiple equals the CPU's Internal frequency (the advertised CPU speed). 123 123 123 123 123 123 FS3 FS2 FS1 FS0 CPU PCI 66.8MHz 75.0MHz 83.30MHz 100.30MHz 103.0MHz 105MHz 33.4MHz 37.5MHz 41.65MHz 33.43MHz 34.3MHz 35MHz 123 FS3 123 123 123 123 123 FS2 FS1 FS0 P2-99 CPU 110.00MHz112.00MHz115.00MHz 120MHz 124MHz 124.00MHz PCI 36.67MHz 37.33MHz 38.33MHz 40MHz 31MHz 41.33MHz 123 123 123 123 P2-99 CPU External Clock (BUS) Frequency Selection FS3 FS2 FS1 FS0 CPU 133.0MHz 133.00MHz 140MHz 150.0MHz PCI 33.3MHz 44.33MHz 35MHz 37.5MHz 16 ASUS P2-99 User's Manual