Asus P4P800 Motherboard DIY Troubleshooting Guide - Page 29

Loading the Intel Application Accelerator RAID Edition Driver During O R 11 Loading the Intel Application Accelerator RAID Edition Driver During Operating System Install 1. As Windows* Setup begins, press to specify the RAID driver. 2. When queried by the installation screen, press to specify an additional device. 3. Insert the floppy disk labeled Intel Application Accelerator RAID Edition Driver and press . (The following four files should be on this disk: IASTOR.INF, IASTOR.SYS, IASTOR.CAT, and TXTSETUP.OEM) 4. Press to select the Intel RAID Controller. 5. Press to continue with Windows Setup. 11.1 Instructions on Creating F6 Floppy Diskette To create an F6 floppy diskette that contains the files that are needed when installing the driver via an F6 installation method, complete the following steps: 1. Download the Intel Application Accelerator RAID Edition (or use the CD shipped with your motherboard which contains the Intel Application Accelerator RAID Edition). The Intel Application Accelerator RAID Edition can be downloaded from the following website: http://downloadfinder.intel.com/scripts-df/Product_Filter.asp?ProductID=961 2. The following four files need to be copied from the compressed .CAB file (which is contained inside the Intel Application Accelerator RAID Edition .EXE package): IASTOR.INF, IASTOR.SYS, IASTOR.CAT, and TXTSETUP.OEM. 3. To extract these files, run 'C:\SETUP.EXE -A -P C:\' (as described in the 'Advanced Installation Instructions' section of the README.TXT.) 4. Once these files have been extracted, copied the IASTOR.INF, IASTOR.SYS, IASTOR.CAT, and TXTSETUP.OEM files to a floppy diskette. Note: These files should be in the root directory of the floppy. Note: Any spaces in the pathname or filename require quotes around the pathname or filename. The switches do not require quotes. For example: "C:\My Documents\setup.exe" -A -P User's Manual 29