Asus P4P800 Motherboard DIY Troubleshooting Guide - Page 41

Installing the Intel Application Accelerator RAID Edition R 13 Installing the Intel Application Accelerator RAID Edition 13.1 Installation Caution Caution: The Intel Application Accelerator RAID Edition driver may be used to operate the hard drive from which the system is booting or a hard drive that contains important data. For this reason, you cannot remove or un-install this driver from the system after installation; however, you will have the ability to un-install all other non-driver components. The following non-driver components can be un-installed: • Intel Application Accelerator RAID Edition Utility • Help Documentation • Start Menu Shortcuts • System Tray Icon Service • RAID Monitor Service 13.2 Steps to Take Before Installing the Intel Application Accelerator RAID Edition 13.2.1 13.3 Resolve Conflicts in Device Manager Before installing the Intel Application Accelerator RAID Edition, there should be NO conflicts (e.g. yellow exclamation points or red X's) in Device Manager under Hard Disk Controllers. Device Manager can be accessed by going to: Start Button / Settings / Control Panel / System / Device Manager. Often, installing the Intel® Chipset Software Installation Utility will resolve conflicts where the operating system does not properly recognize the Intel device. Please refer to Appendix A for additional information on the Intel Chipset Software Installation Utility. Obtaining and Installing the Intel Application Accelerator RAID Edition The Intel Application Accelerator RAID Edition is most likely supplied on a CD-ROM that was included with your motherboard or system. User's Manual 41