Asus P5GD1 P5GD1 User's Manual English Version E1745 - Page 50
P5GD1 Chassis intrusion connector, P5GD1 Analog front panel connector - replacement
View all Asus P5GD1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
11. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default, the pins labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. CHASSIS +5VSB_MB Chassis Signal GND P5GD1 (Default) P5GD1 Chassis intrusion connector 12. Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC '97 audio standard. Connect one end of the front panel audio I/O module cable to this connector. AAFP Azalia-compliant pin definition Legacy AC'97-compliant pin definition AGND +5VA BLINE_OUT_R BLINE_OUT_L GND PRESENCE# SENSE1_RETUR SENSE2_RETUR MIC2 MICPWR Line out_R NC Line out_L PORT1 L PORT1 R PORT2 R SENSE_SEND PORT2 L P5GD1 P5GD1 Analog front panel connector Connect a high-definiton front panel audio module to this connector to avail the high-definition audio features of the motherboard. 2-30 Chapter 2: Hardware information