Asus P5L-MX IPAT P5L-MX/IPAT user's manual - Page 41

6. ATX power connectors (24-pin EATXPWR and 4-pin ATX12V) These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. • Do not forget to connect the 4-pin ATX +12 V power plug; otherwise, the system will not boot. • Use of a PSU with a higher power output is recommended when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate. • Make sure that your power supply unit (PSU) can provide at least the minimum power required by your system. See the table below for details. EATX12V EATXPWR +12V DC +12V DC +3 Volts GND GND +12 Volts +12 Volts +5V Standby P5L-MX/IPAT Power OK Ground +5 Volts Ground +5 Volts Ground R +3 Volts P5L-MX/IPAT ATX Power Connector +3 Volts Ground +5 Volts +5 Volts +5 Volts -5 Volts Ground Ground Ground PSON# Ground -12 Volts +3 Volts ASUS P5L-MX/IPAT 1-29