Asus P5P800 SE P5P800 SE User's Manual for English Edition - Page 50
pin ATX12V
View all Asus P5P800 SE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
7 . ATX power connectors (24-pin EATXPWR, 4-pin ATX12V) These connectors are for an ATX power supply. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. • Do not forget to connect the 4-pin ATX +12 V power plug; otherwise, the system will not boot up. • When using an ATX 12 V PSU with 20-pin power plug, make sure that it can provide 8 A on the +12 V lead and at least 1A on the +5V standby lead (+5 VSB). The minimum recommended wattage is 350 W for a fully configured system. The system may become unstable or may not boot up if the power is inadequate. • You must install a Power Supply Unit (PSU) with a higher power rating if you intend to install additional devices. ATX12V +12V DC GND ® P5P800 SE +12V DC GND P5P800 SE ATX power connector EATXPWR +3 Volts -12 Volts Ground PSON# Ground Ground Ground -5 Volts +5 Volts +5 Volts +5 Volts Ground +3 Volts +3 Volts Ground +5 Volts Ground +5 Volts Ground Power OK +5V Standby +12 Volts +12 Volts +3 Volts 2-30 Chapter 2: Hardware information