Asus P5P800 SE P5P800 SE User's Manual for English Edition - Page 52
LINE_OUT_L/BLINE_OUT_L are shorted with jumper caps. Remove
View all Asus P5P800 SE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
+5VSB_MB Chassis Signal GND 10. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default, the pins labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. CHASSIS ® P5P800 SE (Default) P5P800 SE intrusion connector 11. Front panel audio connector (10-1 pin FP_AUDIO) This is an interface for the front panel audio cable that allows convenient connection and control of audio devices. By default, the pins labeled LINE_OUT_R/BLINE_OUT_R and the pins LINE_OUT_L/BLINE_OUT_L are shorted with jumper caps. Remove the caps only when you are connecting the front panel audio cable. FP_AUDIO ® P5P800 SE P5P800 SE Front panel audio connector AGND +5VA BLINE_OUT_R BLINE_OUT_L MIC2 MICPWR Line out_R NC Line out_L 2-32 Chapter 2: Hardware information