Asus P5P800 SE P5P800 SE User's Manual for English Edition - Page 76

Enhanced Mode Support On [S-ATA] The default setting S-ATA allows you to use native OS on Serial ATA and Parallel ATA ports. We recommend that you do not change the default setting for better OS compatibility. In this setting, you may use legacy OS on the Parallel ATA ports o n l y i f you did not install any Serial ATA device. The P-ATA+S-ATA and P-ATA options are for advanced users only. If you set to any of these options and encounter problems, revert to the default setting S - A T A. Configuration options: [P-ATA+S-ATA] [S-ATA] [P-ATA] The E n h a n c e d M o d e S u p p o r t O n appears only when the item O n b o a r d I D E O p e r a t e M o d e is set to E n h a n c e d M o d e. IDE Port Settings [Primary P-ATA+S-ATA] Allows selection of the IDE ports to activate if you are using a l e g a c y operating system. Set to [Primary P-ATA+S-ATA] if you wish to use the primary Parallel ATA and Serial ATA ports, or set to [Secondary P-ATA+SATA] to enable the secondary P-ATA port instead. Setting to [P-ATA Ports Only] disables the two Serial ATA ports supported by ICH5. Configuration options: [Primary P-ATA+S-ATA] [Secondary P-ATA+S-ATA] [P-ATA Ports Only] The I D E P o r t S e t t i n g s appears only when the item O n b o a r d I D E O p e r a t e M o d e is set to C o m p a t i b l e M o d e. IDE Detect Time Out [35] Selects the time out value for detecting ATA/ATAPI devices. Configuration options: [0] [5] [10] [15] [20] [25] [30] [35] 4-16 Chapter 4: BIOS setup