Asus PRIME Z370-P User Guide - Page 62
PCH Configuration, PCH Storage Configuration
View all Asus PRIME Z370-P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
DMI/OPI Configuration This item allows you to control various DMI (direct media interface) to run at PCI-E 2.0 speed. DMI Max Link Speed [Auto] Allows you to configure the DMI speed. Configuration options: [Auto] [Gen1] [Gen2] [Gen3] PEG Port Configuration Allows you to configure the PEG Port settings. PCIEx16_1 Link Speed [Auto] Allows you to configure the PCIEx16 speed for slot 1. Configuration options: [Auto] [Gen1] [Gen2] [Gen3] Memory Configuration Allows you to configure the memory configuration parameters. Memory Remap [Enabled] Allows you to enable or disable memory remap above 4GB. Configuration options: [Enabled] [Disabled] 2.6.4 PCH Configuration This item allows you to configure the PCI Express configuration settings. PCI Express Configuration PCIe Speed [Auto] Allows you to configure the speed for the PCIe slots. Configuration options: [Auto] [Gen1] [Gen2] [Gen3] IOAPIC 24-119 Entries [Enabled] Allows you to enable or disable IOAPIC 24/119 entries. Configuration options: [Enabled] [Disabled] 2.6.5 PCH Storage Configuration While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Empty if no SATA device is installed to the corresponding SATA port. SATA Controller(s) [Enabled] Enables or disables onboard the SATA device. Configuration options: [Disabled] [Enabled] The following items appear only when you set the SATA Controller(s) to [Enabled]. 2-32 Chapter 2: Getting started