Asus Pro E500 G6 User Manual - Page 107
Network Stack Configuration, Legacy USB Support, XHCI Hand-off, USB Single Port Control
![]() |
View all Asus Pro E500 G6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Legacy USB Support [Enabled] Your system supports the USB devices in legacy operating systems. [Disabled] Your USB devices can be used for BIOS setup only and cannot be recognized in the boot devices list. [Auto] Your system automatically detects the presence of USB devices at startup. If any USB devices are detected, the legacy USB support is enabled. XHCI Hand-off This item is set to [Disabled] by default for the EHCI (enhanced host controller interface) support by XHCI drivers in operating systems. [Disabled] [Enabled] Support XHCI by XHCI drivers for operating systems with XHCI support. Support XHCI by BIOS for operating systems without XHCI support. USB Single Port Control This item allows you to enable or disable the individual USB ports. Refer to section Motherboard layout and Rear I/O connection in your motherboard's user manual for the location of the USB ports. 4.6.9 Network Stack Configuration The items in this menu may vary according to your motherboard. Network stack This item allows you to disable or enable the UEFI network stack. Configuration options: [Disable] [Enable] The following items appear only when Network Stack is set to [Enabled]. Ipv4/Ipv6 PXE Support This item allows you to enable or disable the Ipv4/Ipv6 PXE wake event. Configuration options: [Disabled] [Enabled] ASUS Pro E500 G6 4-43
![](/manual_guide/products/asus-pro-e500-g6-user-manual-00b3a42/107.png)