Asus ProArt Display OLED PA27DCE User Guide - Page 16
Attaching the stand arm/base
View all Asus ProArt Display OLED PA27DCE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Chapter 2: Setup 2.1 Attaching the stand (arm/base) To assemble the stand: 1. Carefully take the monitor out of the box. Hold the monitor firmly and do not press on the panel screen when lifting to avoid any accidental damage (Figure 1). 2. Have the front of the monitor face down on a table. 3. Align and slide the guide tabs on the stand arm into the mounting slots on the rear of the monitor. Then place the mounting plate onto its compartment (Figure 2). 4. Install the stand base to the stand arm (Figure 3). 5. Lift the screw ring and turn it clockwise to secure the stand base in place (Figure 4). (Figure 1) (Figure 2) (Figure 4) ASUS PA27DCE OLED Monitor (Figure 3) 2-1
2-1
ASUS PA27DCE OLED Monitor
Chapter 2:
Setup
2.1
Attaching the stand (arm/base)
To assemble the stand:
1.
Carefully take the monitor out of the box. Hold the monitor firmly and do
not press on the panel screen when lifting to avoid any accidental damage
(Figure 1).
2.
Have the front of the monitor face down on a table.
3.
Align and slide the guide tabs on the stand arm into the mounting slots on
the rear of the monitor. Then place the mounting plate onto its compartment
(Figure 2).
4.
Install the stand base to the stand arm (Figure 3).
5.
Lift the screw ring and turn it clockwise to secure the stand base in place
(Figure 4).
(Figure 1)
(Figure 2)
(Figure 4)
(Figure 3)