Asus ProArt Display OLED PA27DCE User Guide - Page 25
HDR_PQ Rec2020, HDR_HLG BT2100, HDR_HLG DCI, User Mode 1/User Mode 2
View all Asus ProArt Display OLED PA27DCE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
• HDR_PQ Rec2020: Presents ST2084 with Rec.2020 color gamut and D65 white point. »» PQ Optimized: Delivers the optimized HDR performance of this display with as much accuracy as with ST2084 in terms of display luminance capability. »» PQ Clip: Preserves PQ curve till displaying maximum luminance with accuracy. ST2084 code value with higher than display maximum will be mapped to the maximum luminance. »» PQ Basic: Presents HDR performance of general HDR supported displays. • HDR_HLG BT2100: Compliant with BT2100. • HDR_HLG DCI: Compliant with DCI-P3. • User Mode 1/User Mode 2: You can save one or two ProArt Calibration profiles as User Mode 1/User Mode 2 after executing ProArt Calibration and then have quick access here. Please apply the following settings while performing ProArt color calibration: • Set output dynamic to full range. • Set output color format to RGB. • Set output color depth to 8 bit. Below tables show the default configurations for each ProArt Preset mode: Function Color Temp. Brightness Contrast Sharpness Saturation Hue ProArt Palette/ Color Black Level Gamma Light Effect Adaptive Color Uniform Brightness Standard 6500K 50 80 Enable (0) Middle (50) Middle (50) Enable (default) Enable (default) Enable (2.2) Enable (default) Enable (default) Enable (default: Off) sRGB Fixed (6500K) Fixed 80nits 80 Enable (0) Fixed Fixed Fixed Enable (default) Fixed (2.2) Fixed Fixed Fixed (On) AdobeRGB Fixed (6500K) 160nits 80 Enable (0) Middle (50) Middle (50) Enable (default) Enable (default) Fixed (2.2) Enable (default) Fixed Enable (default: On) Rec. 709 6500K 100nits 80 Enable (0) Middle (50) Middle (50) Enable (default) Enable (default) Enable (2.4) Enable (default) Enable (default) Enable (default: On) ASUS PA27DCE OLED Monitor 3-3