Asus ProArt Display OLED PA27DCE User Guide - Page 29

• Color Reset: Resets the color related settings. »» Current mode color reset: Resets the color settings of the current color mode to the factory default value. »» All modes color reset: Resets the color settings of all color modes to the factory default value. 3. Image Set the image related setting from this menu. Image Sharpness Aspect Control Input Range Blue Light Filter ASUS PA27DCE Standard Mode HDMI-1 3840x2160@ 60Hz • Sharpness: The adjusting range is from 0 to 100. • Aspect Control: Adjusts the aspect ratio to Full, 4:3, 1:1, or OverScan. • To activate this function, you need to do the following: turn off the PBP mode. • 4:3 is only available when input source is in 4:3 format. OverScan is only available for the HDMI input source. • Input Range: Adjusts the input range to Auto, Full, Limited 16-235, or Limited 16-254. • Blue Light Filter: Adjusts the blue light filter level. »» Level 0: No change. »» Level 1~4: The higher the level, the less blue light is scattered. When Blue Light Filter is activated, the default settings of Standard Mode will be automatically imported. Between Level 1 to Level 3, the Brightness function is user-configurable. Level 4 is optimized setting. It is compliance with TUV Low Blue Light Certification. The Brightness function is not user-configurable. ASUS PA27DCE OLED Monitor 3-7