Asus ROG MAXIMUS Z790 HERO BTF Users Manual English - Page 29
System Panel header, Installation LED switch, System Power LED header PLED
![]() |
View all Asus ROG MAXIMUS Z790 HERO BTF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Chapter 1 17. System Panel header The System Panel header supports several chassis-mounted functions. F_PANEL • System Power LED header (PLED) The 2-pin header allows you to connect the System Power LED. The System Power LED lights up when the system is connected to a power source, or when you turn on the system power, and blinks when the system is in sleep mode. • Storage Device Activity LED header (HDLED) The 2-pin header allows you to connect the Storage Device Activity LED. The Storage Device Activity LED lights up or blinks when data is read from or written to the storage device or storage device add-on card. • Power Button/Soft-off Button header (PWRBTN) The 3-1 pin header allows you to connect the system power button. Press the power button to power up the system, or put the system into sleep or soft-off mode (depending on the operating system settings). • Reset button header (RESET) The 2-pin header allows you to connect the chassis-mounted reset button. Press the reset button to reboot the system. 18. Installation LED switch The Installation LED switch is used to control the Q-LEDs, 8-pin Power Plug LEDs, and GC_HPWR Power Plug LEDs. When set to enabled, these LEDs will light up as intended. Q_INTL_SW Motherboard User Manual 1-15
![](/manual_guide/products/asus-rog-maximus-z790-hero-btf-users-manual-english-aa6aceb/29.png)