Asus ROG MAXIMUS Z790 HERO BTF Users Manual English - Page 48
Check the GC_HPWR Power Plug LEDs to make sure the GC_HPWR Power, Connection status, Power connected
View all Asus ROG MAXIMUS Z790 HERO BTF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
3. Select to connect the PSU to the 12V-2X6 power connector of the motherboard's GC_HPWR Power connectors. Chapter 2 12V-2X6 Ensure the power connectors are properly connected to the motherboard GC_HPWR Power connectors. 4. Check the GC_HPWR Power Plug LEDs to make sure the GC_HPWR Power connectors have been properly connected. You may refer to the following LED table for more information on the GC_HPWR Power connectors connection status. The GC_HPWR Power Plug LEDs will only function when a PCIe High Power Connector graphics card is installed. The GC_HPWR Power Plug LEDs will not light up if a standard graphics card is installed, or if no graphics card is installed. Connection status 1 Motherboard 12V-2X6 power connector not properly connected. Power connected, powered off 12V-2X6_LED lights up. 2 Motherboard 12V-2X6 12V-2X6_LED is turned power connector properly off. connected. Power connected, powered on 12V-2X6_LED stays lit up. 12V-2X6 power connector not properly connected, and the graphics card cannot be powered on. Make sure the power connector is properly connected. 12V-2X6_LED remains turned off indicating the graphics card can power on normally. 2-12 Chapter 2: Basic Installation