Asus ROG Rampage VI Extreme Encore Users Manual English - Page 34
Internal connectors, SATA 6Gb/s connector
![]() |
View all Asus ROG Rampage VI Extreme Encore manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Chapter 1 1.10 Internal connectors 1. SATA 6Gb/s connector The SATA 6Gb/s connector allows you to connect SATA devices such as optical disc drives and hard disk drives via a SATA cable. If you installed SATA storage devices, you can create a RAID 0, 1, 5, and 10 configuration with the Intel® Rapid Storage Technology through the onboard Intel® X299 chipset. • The connectors are set to [RAID Mode] by default. • Before creating a RAID set, refer to the RAID Configuration Guide. You can download the RAID Configuration Guide from the ASUS website. 1-18 Chapter 1: Product Introduction
![](/manual_guide/products/asus-rog-rampage-vi-extreme-encore-users-manual-english-ee77c87/34.png)
1-18
Chapter 1: Product Introduction
Chapter 1
1.10
Internal connectors
1.
SATA 6Gb/s connector
The SATA 6Gb/s connector allows you to connect SATA devices such as optical disc
drives and hard disk drives via a SATA cable.
If you installed SATA storage devices, you can create a RAID 0, 1, 5, and 10 configuration
with the Inte
l®
Rapid Storage Technology through the onboard Intel
®
X299 chipset.
•
The connectors are set to
[RAID Mode]
by default.
•
Before creating a RAID set, refer to the
RAID Configuration Guide
. You can
download the
RAID Configuration Guide
from the ASUS website.