Asus ROG Rampage VI Extreme Encore Users Manual English - Page 63
M.2 pads on your DIMM.2 module and replace them with the bundled taller M.2 pads.
View all Asus ROG Rampage VI Extreme Encore manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Chapter 2 12 11 13 14 16 15 • Before you install or remove the DIMM.2 card, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard or DIMM.2 card. • The DIMM.2 card is notched to fit in only one orientation. Ensure that the notch on your card is aligned correctly with the DIMM.2 slot before inserting the card. • DIMM.2 module supports PCIe 3.0 x4 M Key design and type 2242 / 2260 / 2280 / 22110 PCIe storage devices. • DIMM.2_2 will be disabled when the PCIe runs x16/x16/x8 mode on 48-Lane CPU. • DIMM.2_2 will be disabled when the PCIe runs x16/x16/x4 mode on 44-Lane CPU. • DIMM.2 will be disabled when using 28-Lane CPU. • When using the DIMM.2 Heatsink module, we recommend removing the M.2 SSD's default thermal heatsink before installing the M.2 SSD to the DIMM.2 Heatsink module. • If your M.2 SSD does not feature a flash chip on the back, please remove the default M.2 pads on your DIMM.2 module and replace them with the bundled taller M.2 pads. ROG RAMPAGE VI EXTREME ENCORE 2-15