Asus RS100-E8-PI2 User Guide - Page 32
-inch SATA HDD assembly in such, Secure the 3.5-inch SATA HDD
View all Asus RS100-E8-PI2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
6. Connect the SATA signal cable and a power from the power supply to the 3.5-inch HDD. Use an L-type SATA connector to connect the 3.5-inch SATA HDD to the motherboard. 7. Place and orient the HDD tray and 3.5-inch SATA HDD assembly in such a way that the SATA cable and power connector is aligned towards the rear (as shown). 8. Secure the 3.5-inch SATA HDD and HDD drive tray assembly to the HDD bay 1 using the screws removed in step 2. Ensure that the SSD drive tray is seated securely in place. 2-14 Chapter 2: Hardware setup
Chapter 2:
Hardware setup
2-14
6.
Connect the SATA signal cable and a
power from the power supply to the
3.5-inch HDD.
7.
Place and orient the HDD tray and
3.5-inch SATA HDD assembly in such
a way that the SATA cable and power
connector is aligned towards the rear
(as shown).
Use an L-type SATA connector to
connect the 3.5-inch SATA HDD to the
motherboard.
8.
Secure the 3.5-inch SATA HDD and
HDD drive tray assembly to the HDD
bay 1 using the screws removed in
step 2.
Ensure that the SSD drive tray is
seated securely in place.