Asus RS100-E8-PI2 User Guide - Page 60
VGA controller setting 3-pin VGA_SW1, LAN_SW2, I210AT Gigabit LAN
View all Asus RS100-E8-PI2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
2. VGA controller setting (3-pin VGA_SW1) This jumper allows you to enable or disable the onboard VGA controller. Set to pins 1-2 to activate the VGA feature. 3. LAN controller setting (3-pin LAN_SW1, LAN_SW2) These jumpers allows you to enable or disable the onboard Intel® I210AT Gigabit LAN controllers. Set to pins 1-2 to activate the Gigabit LAN feature. 4. RAID configuration utility selection (3-pin RAID_SEL1) This jumper allows you to select the RAID configuration utility for creating disk arrays. Place the jumper caps over pins 1-2 if you want to use a Third-Party Setup Utility (default). Otherwise, place the jumper caps to pins 2-3 to use the Intel® Rapid Storage Technology. 4-8 Chapter 4: Motherboard information
Chapter 4: Motherboard information
4-8
2.
VGA controller setting (3-pin VGA_SW1)
This jumper allows you to enable or disable the onboard VGA controller. Set to pins 1–2
to activate the VGA feature.
3.
LAN controller setting (3-pin LAN_SW1, LAN_SW2)
These jumpers allows you to enable or disable the onboard Intel
®
I210AT Gigabit LAN
controllers. Set to pins 1-2 to activate the Gigabit LAN feature.
4.
RAID configuration utility selection (3-pin RAID_SEL1)
This jumper allows you to select the RAID configuration utility for creating disk arrays.
Place the jumper caps over pins 1–2 if you want to use a Third-Party Setup Utility
(default). Otherwise, place the jumper caps to pins 2–3 to use the Intel
®
Rapid Storage
Technology.