Asus RS100-E8-PI2 User Guide - Page 38
-inch SATA HDD assembly to the, Secure the HDD drive tray and
View all Asus RS100-E8-PI2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
7. Carefully place the 3.5-inch Serial ATA HDD and HDD drive tray assembly into the drive bay. Ensure that no cables or connectors is out-of-place. 8. Secure the HDD drive tray and the 3.5-inch SATA HDD assembly to the HDD bay 2 using the four screws removed in step 2 Ensure that screw holes on the HDD drive tray and the 3.5-inch SATA HDD assembly matches the screw holes on the HDD bay 2 . 9. Get the ODD and slide it back into the optical disc drive slot. 10. Secure the ODD and the HDD drive tray to the HDD bay 2 using the screw removed in step 1.c. 11. Connect the ODD signal cable and power cable to the optical disk drive. 2-20 Chapter 2: Hardware setup
Chapter 2:
Hardware setup
2-20
9.
Get the ODD and slide it back into the
optical disc drive slot.
10.
Secure the ODD and the HDD drive
tray to the HDD bay 2 using the screw
removed in step 1.c.
11.
Connect the ODD signal cable and
power cable to the optical disk drive.
7.
Carefully place the 3.5-inch Serial ATA
HDD and HDD drive tray assembly into
the drive bay.
Ensure that no cables or connectors is
out-of-place.
8.
Secure the HDD drive tray and the
3.5-inch SATA HDD assembly to the
HDD bay 2 using the four screws
removed in step 2
Ensure that screw holes on the HDD
drive tray and the 3.5-inch SATA HDD
assembly matches the screw holes on
the HDD bay 2 .