Asus RS100-E8-PI2 User Guide - Page 33
Installing 2.5-inch SSDs on HDD bay 1 (Optional), Get one 2.5-inch SSD and orient it
View all Asus RS100-E8-PI2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
2.4.2 Installing 2.5-inch SSDs on HDD bay 1 (Optional) To replace an installed 3.5-inch Serial ATA HDD with two 2.5-inch SSDs in HDD bay 1: 1 Locate the 3.5-inch Serial ATA (SATA) HDD and the HDD drive tray assembly in the chassis. 2. Disconnect the SATA cable and the power cable from the 3.5-inch SATA HDD. 3. Release the four screws that secure the HDD drive tray and 3.5-inch SATA HDD assembly to HDD bay 1 and set aside. HDD drive tray HDD bay 1 4. Remove the HDD drive tray and 3.5-inch SATA HDD assembly. 5. Prepare the SSD drive tray. 6. Get one 2.5-inch SSD and orient it in such a way that the SATA connector of the 2.5-inch SSD is exposed as shown. Ensure that the screw holes on the underside of the 2.5-inch SSD matches the screw holes on the SSD drive tray. 7. Fasten the 2.5-inch SSD to the SSD drive tray using four screws. SSD drive tray 2.5-inch SSD ASUS RS100-E8-PI2 2-15