Asus TS150-E2 User Guide - Page 117
RAID driver installation
View all Asus TS150-E2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
6.2 RAID driver installation 6.2.1 Creating a RAID driver disk A floppy disk with the RAID driver is required when installing Windows® 2000/XP operating system on a hard disk drive that is included in a RAID set. You can create a RAID driver disk in DOS (using FreeDOS from the support CD) or in Windows® environment. DOS To create a RAID driver disk in DOS environment: 1. Place the motherboard support CD in the optical drive. 2. Restart the computer, then enter the BIOS Setup. 3. Set the optical drive as the first boot priority to boot from the support CD. Save your changes, then exit the BIOS Setup. 4. Restart the computer. The following screen appears during POST. 1) FreeDOS command prompt 2) Create Intel Application Accelerator for Windows driver Please choose 1 ~ 2:_ 5. Place a blank, high-density floppy disk to the floppy disk drive, then press . The following message displays on screen. Warning!! Bootable CD will delete all data in floppy Press a key to continue._ 6. Press any key to continue. The RAID drivers are copied to the floppy disk. 7. Eject the floppy disk, then write-protect it to prevent computer virus infection. 8. Press any key to continue. ASUS TS150-E2 6-9