Asus TS150-E2 User Guide - Page 99
Allocate IRQ to PCI VGA [Yes]
![]() |
View all Asus TS150-E2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Allocate IRQ to PCI VGA [Yes] When set to [Yes], BIOS assigns an IRQ to PCI VGA card if the card requests for an IRQ. When set to [No], BIOS does not assign an IRQ to the PCI VGA card even if requested. Configuration options: [Yes] [No] Palette Snooping [Disabled] When set to [Enabled], the palette snooping feature informs the PCI devices that an ISA graphics device is installed in the system so that the latter can function correctly. Configuration options: [Disabled] [Enabled] PCI IDE BusMaster [Enabled] Allows BIOS to use PCI bus mastering when reading/writing to IDE devices. Configuration options: [Disabled] [Enabled] IRQ-xx assigned to [PCI Device] When set to [PCI Device], the specific IRQ is free for use of PCI/PnP devices. When set to [Reserved], the IRQ is reserved for legacy ISA devices. Configuration options: [PCI Device] [Reserved] Reserved Memory Size [Disabled] Allows you to choose the size of memory block to be reserved for legacy ISA devices. Configuration options: [Disabled] [16K] [32K] [64K] DMA Channel X [PCI Device] When set to [PCI Device], the specific DMA channel is free for use of PCI/PnP devices. When set to [Reserved], the DMA channel is reserved for legacy ISA devices. Configuration options: [PCI Device] [Reserved] Active State Power-Management [Enabled] Allows you to enable or disable the PCI Express L0s and L1 link power states. Configuration options: [Disabled] [Enabled] ASUS TS150-E2 5-29
![](/manual_guide/products/asus-ts150e2-user-guide-5794a57/99.png)