Asus TUEG-VM TUEG-VM User Manual - Page 19
ASUS TUEG-VM User's Manual, USB Device Wake Up USBPWR1,USBPWR2, Wake On USB for STR State, NOTES,
View all Asus TUEG-VM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
3. H/W SETUP Motherboard Settings 3. HARDWARE SETUP 2) USB Device Wake Up (USBPWR1,USBPWR2) These allow you to disable or enable the USB device wake up function. Set these jumpers to Enable if you wish to use your USB devices to wake up your computer. This feature requires an ATX power supply that can supply at least 2A on the +5VSB lead. The default is set to Disable because not all computers have the appropriate ATX power supply. Your computer will not power ON if you set this to Enable and do not have the appropriate ATX power supply. NOTE: This jumper must be set in conjunction with Wake On USB for STR State in 4.5.1 Power Up Control. NOTES 1. For suspend to RAM function, these jumpers must be set to Enable. 2. The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal working conditions or in the sleep mode. USBPWR1 12 23 ® TUEG-VM TUEG-VM USB Device Wake Up Disable (Default) Enable USBPWR2 12 23 Disable (Default) Enable 3) CNR/USB Selection (CNRUSB1/CNRUSB2) The CNR slot can support an optional USB hub CNR card. If a USB hub CNR card is used, set these jumpers to CNR. Otherwise, leave them on the default setting of USB2 Connect. CNRUSB1 CNRUSB2 12 ® TUEG-VM TUEG-VM USB/CNR Selection USB2 Connect (default) 23 CNR ASUS TUEG-VM User's Manual 19