Asus TUF Z270 MARK 1 TUF Z270 MARK 1 BIOS_EMEnglish - Page 32
CPU Core/Cache Current Limit Max., Min. CPU Cache Ratio, Extreme Over-voltage
View all Asus TUF Z270 MARK 1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
BCLK Spread Spectrum This item allows you to reduce the EMI. Disable to get more accurate base clocks. Configuration options: [Auto] [Disabled] BCLK Frequency Slew Rate Configuration options: [Auto] [40us/MHz] [80us/MHz] VPPDDR Voltage Configuration options: [Auto] [1.86500] - [2.70000] DMI Voltage Configuration options: [Auto] [0.30000] - [1.90000] Internal PLL Voltage Configuration options: [Auto] [0.900] - [1.845] CPU Core/Cache Current Limit Max. This item allows you to configure a higher current limit to prevent a frequency or power throttling when overclocking. Use the and keys to adjust the value. Configuration options: [Auto] [0.00] - [255.50] Min. CPU Cache Ratio This item allows you to set the minimum possible CPU cache ratio. Use the and keys to adjust the value. Configuration options: [Auto] [8] - [26] Max. CPU Cache Ratio This item allows you to set the maximum possible CPU cache ratio. Use the and keys to adjust the value. Configuration options: [Auto] [8] - [26] Extreme Over-voltage Enable this item to allow higher voltages for overclocking, but the CPU lifetime will not be guaranteed. Configuration options: [Disabled] [Enabled] This item can only be enabled when the onboard CPU_OV jumper is switched on. BCLK Aware Adaptive Voltage When this option is enabled, pcode will be aware of the BCLK frequency when calculating the CPU V/F curves. This is ideal for BCLK OC to avoid high voltage overrides. Uses OC Mailbox command 0x15. Configuration options: [Auto] [Disabled] [Enabled] CPU Core/Cache Voltage Configures the mode of Voltage fed to the cores of the processor. Configuration options: [Auto] [Manual Mode] [Offset Mode] [Adaptive Mode] 32 ASUS TUF Z270 MARK 1 BIOS Manual