Asus TUF Z270 MARK 1 TUF Z270 MARK 1 BIOS_EMEnglish - Page 56

ASST Fan Profile This item allows you to set the appropriate performance level of the ASST Fan. [Standard] Sets to [Standard] to make the chassis fan automatically adjust depending on the chassis temperature. [Silent] Sets to [Silent] to minimize the fan speed for quiet chassis fan operation. [Turbo] Sets to [Turbo] to achieve maximum chassis fan speed. [Manual] Sets to [Manual] to assign detailed fan speed control parameters. Ext. Fan(s) Configuration ASUS FAN EXTENSION CARD is required to configure these items Extension Fan 1-3 Q-Fan Control [Disabled] Disable the Extension Fan Q-Fan control feature. [DC mode] Enable the Extension Fan Q-Fan control in DC mode for 3-pin extension fan. [PWM mode] Enable the Extension Fan Q-Fan control in PWM mode for 4-pin extension fan. Extension Fan 1-3 Q-Fan Source The assignment fan will be controlled according to the selected temperature source. Configuration options: [CPU] [MotherBoard] [PCIEX16_1 Slot] [PCIEX16_3 Slot] [VRM] [PCH] [T_SENSOR1] [EXT_Sensor1] [EXT_Sensor2] [EXT_Sensor3] [Multiple Sources] For EXT_Sensor1-3, connect a Thermistor cable to the EXT_TS1-3 header then place the other end to the component to get the temperature. Extension Fan 1-3 Fan Speed Low Limit This item allows you to disable or set the extension fan warning speed. Configuration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM] Extension Fan 1-3 Profile This item allows you to set the appropriate performance level of the extension fan. [Standard] Set to make the extension fan adjust automatically depending on the CPU temperature. [Silent] Set to minimize the fan speed for quiet extension fan operation. [Turbo] Set to achieve maximum extension fan speed. [Manual] Set to assign the detailed fan speed control parameters. 56 ASUS TUF Z270 MARK 1 BIOS Manual