Asus TUF Z270 MARK 1 TUF Z270 MARK 1 BIOS_EMEnglish - Page 43
SATA Mode Selection, S.M.A.R.T. Status Check, Aggressive LPM support, SATA6G_1Gray - SATA6G_6Gray - drivers
View all Asus TUF Z270 MARK 1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
SATA Mode Selection This item allows you to set the SATA configuration. [AHCI] Set to [AHCI] when you want the SATA hard disk drives to use the AHCI (Advanced Host Controller Interface). The AHCI allows the onboard storage driver to enable advanced Serial ATA features that increases storage performance on random workloads by allowing the drive to internally optimize the order of commands. [Intel RST Premium With Set to [Intel RST Premium With Intel Optane System Intel Optane System Acceleration (RAID)] when you want to create a RAID Acceleration (RAID)] configuration from the SATA hard disk drives. S.M.A.R.T. Status Check S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system that shows a warning message during POST (Power-on Self Test) when an error occurs in the hard disks. Configuration options: [On] [Off] Aggressive LPM support This item is designed for LPM (link power management) support with a better energy saving conditions. When disabled, the hot plug function of SATA ports are disabled. Configuration options: [Disabled] [Enabled] SATA6G_1(Gray) - SATA6G_6(Gray) SATA6G_1(Gray) - SATA6G_6(Gray) This item allows you to enable or disable the selected SATA port. Configuration options: [Disabled] [Enabled] Hot Plug These items appears only when the SATA Mode Selection is set to [AHCI] and allows you to enable or disable SATA Hot Plug Support. Configuration options: [Disabled] [Enabled] ASUS TUF Z270 MARK 1 BIOS Manual 43