Asus TUSI-M TUSI-M User Manual - Page 17
H/w Setup
View all Asus TUSI-M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
3. HARDWARE SETUP 1) JumperFree™ Mode (JEN) This jumper enableS or disableS the JumperFree™ mode. The default enables JumperFree™ mode, which permits processor frequency settings through the BIOS setup (see 4.4 Advanced Menu). Disabling JumperFree™ mode permits manual frequency settings using JP0-JP3; (see the following page). IMPORTANT: In JumperFree™ mode, all jumpers must be set to [1-2]. JP3 JP1 JP2 JP0 3. H/W SETUP Motherboard Settings 01 01 3 2 1 TUSI-M JEN 12 12 JumperFree Mode Jumper Mode TUSI-M JumperFree™ Mode Setting 2) USB Device Wake Up (USBPWR0, USBPWR1) These jumpers allow you to enable or disable the USB device power up function for USB devices connected to your system.This feature requires an ATX power supply that can supply at least 2A on the +5VSB lead. The default is set to Disable because not all computers have the appropriate ATX power supply. Your computer will not power ON if you set these to Enable and do not have the appropriate ATX power supply. NOTES: 1. These two jumpers must be set in unison; that is, either both must be set to Disable or both to Enable. 2. These settings must also be set in conjunction with Wake On USB Device in 4.5.1 Power Up Control. USBPWR1 2 1 Enable 3 2 Disable (Default) ® TUSI-M TUSI-M USB Device Wake Up USBPWR0 12 23 Enable Disable (Default) ASUS TUSI-M User's Manual 17