Asus TUSI-M TUSI-M User Manual - Page 35
ASUS TUSI-M User's Manual, ATX Power Supply Connector, pin block ATXPWR, Power Supply Thermal
View all Asus TUSI-M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
3. H/W SETUP Connectors 01 01 3. HARDWARE SETUP 20) ATX Power Supply Connector (20-pin block ATXPWR) This connector connects to an ATX power supply. The plug from the power supply will only insert in one orientation because of the different hole sizes. Find the proper orientation and push down firmly making sure that the pins are aligned. IMPORTANT: Make sure that your ATX power supply can supply at least 10mA on the +5-volt standby lead (+5VSB). You may experience difficulty in powering ON your system if your power supply cannot support the load. For WakeOn-LAN support, your ATX power supply must supply at least 720mA +5VSB. ® TUSI-M +12.0 Volts +5V Standby Power Good Ground +5.0 Volts Ground +5.0 Volts Ground +3.3 Volts +3.3 Volts TUSI-M ATX Power Connector +5.0 Volts +5.0 Volts NC Ground Ground Ground Power Supply On Ground -12.0 Volts +3.3 Volts 21) Power Supply Thermal Connector (2-pin PWRTMP) This connector connects to an ATX power supply. The plug from the power supply will only insert in one orientation because of the different hole sizes. Find the proper orientation and push down firmly making sure that the pins are aligned. PWRTMP Power Supply Thermal Sensor ® TUSI-M TUSI-M Thermal Sensor Connector ASUS TUSI-M User's Manual 35