Asus TW100-E5 iQuadro User Manual - Page 75
SouthBridge Configuration
View all Asus TW100-E5 iQuadro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
iGPU Spread Spectrum [3.00% Tri-Down] Set this item to [Disabled] for better performance. Configuration options: [Disabled] [1.00% Tri-Down] [2.00% Tri-Down] [3.00% Tri-Down] [5.00% Tri-Down] SouthBridge Configuration Advanced BIOS SETUP UTILITY SouthBridge Chipset Configuration LPC P2P↓ P2P↑ [+ +/- +/-] Primary Graphics Adapter [PCIE VGA Card Firs] iGPU and Ext-VGA Selection iGPU Frame Buffer Detect iGPU Frame Buffer Size [Disable iGPU if Ex] [Disabled] [256MB] Retrain PCIE devices to Gen2 [Yes] Options LPC P2P↓ P2P Allows you to set the decoding mode for PLC and P2P. Configuration options Primary Graphics Adapter [PCIE VGA Card First] Allows you to select which graphics controller to use as the primary boot device. Configuration options: [PCI VGA Card First] [Internal VGA First] [PCIE VGA Card First] iGPU and Ext-VGA Selection [Disable iGPU if External VGA Card Exist] Allows you to enable or disable the onboard GPU. Configuration options: [Disable iGPU if External VGA Card Exist] [Both Exist and iGPU by Frame Buffer Detect] iGPU Frame Buffer Detect [Disabled] Allows you to set the onboard GPU frame buffer control mode. Configuration options: [Disabled] [Enabled] iGPU Frame Buffer Size [256MB] This item becomes user-configurable when you set the iGPU Frame Buffer Detect item to [Disabled] and allows you to set frame buffer size for onboard GPU. Configuration options: [32MB] [64MB] [128MB] [256MB] [512MB] Retrain PCIE devices to Gen2 [Yes] Set this item to [Yes] to allow the PCIe device installed on the PCIe x16 slot to work at PCIe 2.0 standard if supported. Configuration options: [Yes] [No] ASUS TW100-E5 4-21