Asus Z10PE-D16 WS User Guide - Page 50
RAID selection jumper setting 3-pin RAID_SEL1, ME firmware force recovery setting 3-pin ME_RCVR1
View all Asus Z10PE-D16 WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
4. RAID selection jumper setting (3-pin RAID_SEL1) This jumper allows you to select the PCH SATA RAID mode to use LSI MegaRAID software or Intel® Rapid Storage Technology enterprise 3.0 RAID. Place the jumper caps over pins 1-2 if you want to use the LSI MegaRAID software RAID Utility (default); otherwise, place the jumper caps to pins 2-3 to use the Intel® Rapid Storage Technology Enterprise Option ROM Utility. 5. ME firmware force recovery setting (3-pin ME_RCVR1) This jumper allows you to force Intel Management Engine (ME) boot from recovery mode when ME become corrupted. 2-30 Chapter 2: Hardware information
2-30
Chapter 2: Hardware information
4.
RAID selection jumper setting (3-pin RAID_SEL1)
This jumper allows you to select the PCH SATA RAID mode to use LSI MegaRAID
software or Intel
®
Rapid Storage Technology enterprise 3.0 RAID. Place the jumper
caps over pins 1–2 if you want to use the LSI MegaRAID software RAID Utility (default);
otherwise, place the jumper caps to pins 2–3 to use the Intel
®
Rapid Storage Technology
Enterprise Option ROM Utility.
5.
ME firmware force recovery setting (3-pin ME_RCVR1)
This jumper allows you to force Intel Management Engine (ME) boot from recovery mode
when ME become corrupted.