Asus Z10PE-D16 WS User Guide - Page 90
APM, RTC Alarm Date Days, Minute/Second
![]() |
View all Asus Z10PE-D16 WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
4.5.6 APM Allows you to configure the Advance Power Management (APM) settings. Restore AC Power Loss [Last State] When set to [Power Off], the system goes into off state after an AC power loss. When set to [Power On], the system will reboot after an AC power loss. When set to [Last State], the system goes into either off or on state, whatever the system state was before the AC power loss. Configuration options: [Power Off] [Power On] [Last State] Power On By PCIE [Disabled] [Disabled] Disables the PCIE devices to generate a wake event. [Enabled] Enables the PCIE devices to generate a wake event. Power On By Ring [Disabled] [Disabled] Disables the PCIE devices to generate a wake event. [Enabled] Enables the PCIE devices to generate a wake event. Power On By RTC [Disabled] [Disabled] Disables RTC to generate a wake event. [Enabled] When set to [Enabled], the items RTC Alarm Date (Days) and Hour/ Minute/Second will become user-configurable with set values. 4-20 Chapter 4: BIOS setup
![](/manual_guide/products/asus-z10ped16-ws-user-guide-a416cfc/90.png)