Asus Z10PE-D16 WS User Guide - Page 55
Internal connectors, Hard disk activity LED connector 4-pin HDLED1
View all Asus Z10PE-D16 WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
2.9.2 Internal connectors 1. Hard disk activity LED connector (4-pin HDLED1) This LED connector is for the storage add-on card cable connected to the SATA or SAS add-on card. The read or write activities of any device connected to the SATA or SAS add-on card causes the front panel LED to light up. 2. USB 2.0 connectors (10-1 pin USB1112) These connectors are for USB 2.0 ports. Connect the USB module cables to connectors USB78 and USB910, then install the modules to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed. ASUS Z10PE-D16 WS 2-35
ASUS Z10PE-D16 WS
2-35
2.9.2
Internal connectors
1.
Hard disk activity LED connector (4-pin HDLED1)
This LED connector is for the storage add-on card cable connected to the SATA or
SAS add-on card. The read or write activities of any device connected to the SATA or
SAS add-on card causes the front panel LED to light up.
2.
USB 2.0 connectors (10-1 pin USB1112)
These connectors are for USB 2.0 ports. Connect the USB module cables to
connectors USB78 and USB910, then install the modules to a slot opening at the back
of the system chassis. These USB connectors comply with USB 2.0 speciļ¬cation that
supports up to 480 Mbps connection speed.