Asus Z87-C Z87-C User's Manual - Page 79
Realtek LAN Controller [Enabled], ErP Ready [Disabled], Restore AC Power Loss [Power Off]
View all Asus Z87-C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Realtek LAN Controller [Enabled] [Enabled] Enables the Realtek® LAN controller. [Disabled] Disables the Realtek® LAN controller. The following item appears only when you set the Realtek LAN Controller to [Enabled]. Realtek PXE OPROM [Disabled] Allows you to enable or disable the PXE OptionRom of the Realtek LAN controller. Configuration options: [Enabled] [Disabled] Serial Port Configuration Allows you to set the parameters of the serial ports. This item only functions only if there is a serial port (COM1) connector connected to the motherboard. Serial Port [Enabled] Allows you to enable or disable the serial port. Configuration options: [Disabled] [Enabled] The following item appears only if you set the Serial Port to [Enabled]. Change Settings Allows you to select an optimal setting for Super I/O device. 2.6.8 APM ErP Ready [Disabled] Allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP requirement. When set to [Enabled], all other PME options will be switched off. Configuration options: [Disabled] [Enabled (S4+S5] [Enabled (S5)] Restore AC Power Loss [Power Off] [Power On] The system goes into ON state after an AC power loss. [Power Off] The system goes into OFF state after an AC power loss. [Last State] The system goes into either OFF or ON state, whatever the system state was before the AC power loss. Power On By PS/2 Keyboard [Disabled] Allows you to turn on your computer by using the PS/2 keyboard. Configuration options: [Disabled] [Enabled] Chapter 2: BIOS information 2-33